Microsoft 070-506-VB PDF

ITCertKing is the only website which is able to supply all your needed information about Microsoft certification 070-506-VB exam. Using The information provided by ITCertKing to pass Microsoft certification 070-506-VB exam is not a problem, and you can pass the exam with high scores.

Microsoft certification 070-506-VB exam is one of the many IT employees' most wanting to participate in the certification exams. Passing the exam needs rich knowledge and experience. While accumulating these abundant knowledge and experience needs a lot of time. Maybe you can choose some training courses or training tool and spending a certain amount of money to select a high quality training institution's training program is worthful. ITCertKing is a website which can meet the needs of many IT employees who participate in Microsoft certification 070-506-VB exam. ITCertKing's product is a targeted training program providing for Microsoft certification 070-506-VB exams, which can make you master a lot of IT professional knowledge in a short time and then let you have a good preparation for Microsoft certification 070-506-VB exam.

ITCertKing Microsoft 070-506-VB exam study guide can be a lighthouse in your career. Because it contains all 070-506-VB exam information. Select ITCertKing, it can help you to pass the exam. This is absolutely a wise decision. ITCertKing is your helper, you can get double the result, only need to pay half the effort.

The training tools of ITCertKing contains exam experience and materials which are come up with by our IT team of experts. Also we provide exam practice questions and answers about the Microsoft 070-506-VB exam certification. Our ITCertKing's high degree of credibility in the IT industry can provide 100% protection to you. In order to let you choose to buy our products more peace of mind, you can try to free download part of the exam practice questions and answers about Microsoft certification 070-506-VB exam online.

In order to meet the demand of most of the IT employees, ITCertKing's IT experts team use their experience and knowledge to study the past few years Microsoft certification 070-506-VB exam questions. Finally, ITCertKing's latest Microsoft 070-506-VB simulation test, exercise questions and answers have come out. Our Microsoft 070-506-VB simulation test questions have 95% similarity answers with real exam questions and answers, which can help you 100% pass the exam. If you do not pass the exam, ITCertKing will full refund to you. You can also free online download the part of ITCertKing's Microsoft certification 070-506-VB exam practice questions and answers as a try. After your understanding of our reliability, I believe you will quickly add ITCertKing's products to your cart. ITCertKing will achieve your dream.

ITCertKing is an excellent source of information on IT Certifications. In the ITCertKing, you can find study skills and learning materials for your exam. ITCertKing's Microsoft 070-506-VB training materials are studied by the experienced IT experts. It has a strong accuracy and logic. To encounter ITCertKing, you will encounter the best training materials. You can rest assured that using our Microsoft 070-506-VB exam training materials. With it, you have done fully prepared to meet this exam.

All the IT professionals are familiar with the Microsoft 070-506-VB exam. And all of you dream of owning the most demanding certification. So that you can get the career you want, and can achieve your dreams. With ITCertKing's Microsoft 070-506-VB exam training materials, you can get what you want.

Exam Code: 070-506-VB
Exam Name: Microsoft (TS: Microsoft Silverlight 4, Development)
One year free update, No help, Full refund!
Total Q&A: 75 Questions and Answers
Last Update: 2013-11-14

070-506-VB Free Demo Download: http://www.itcertking.com/070-506-VB_exam.html

NO.1 You are developing a Silverlight 4 application.
The application defines the following three event handlers. (Line numbers are included for reference only.)
01 Private Sub HandleCheck(sender As Object, e As RoutedEventArgs)
02 MessageBox.Show("Checked")
03 End Sub
04
05 Private Sub HandleUnchecked(sender As Object, e As RoutedEventArgs)
06 MessageBox.Show("Unchecked")
07 End Sub
08
09 Private Sub HandleThirdState(sender As Object, e As RoutedEventArgs)
10 MessageBox.Show("Indeterminate")
11 End Sub
You need to allow a check box that can be selected, cleared, or set to Indeterminate. You also need to
ensure that the event handlers are invoked when the user changes the state of the control.
Which XAML fragment should you use?
A. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsChecked="True" Checked="HandleCheck"
Indeterminate="HandleUnchecked" Unchecked="HandleUnchecked" />
B. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsThreeState="True" Checked="HandleCheck"
Indeterminate="HandleThirdState" Unchecked="HandleUnchecked" />
C. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsHitTestVisible="True" Checked="HandleCheck"
Indeterminate="HandleThirdState" Unchecked="HandleUnchecked" />
D. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsEnabled="True" Checked="HandleCheck"
Indeterminate="HandleUnchecked" Unchecked="HandleUnchecked" />
Answer: B

Microsoft exam   070-506-VB exam   070-506-VB dumps   070-506-VB braindump   070-506-VB

NO.2 You are developing a Silverlight 4 application.
You define the visual behavior of a custom control in the ControlTemplate by defining a VisualState object
named Selected.
You need to change the visual state of the custom control to the Selected state.
Which code segment or XAML fragment should you use?
A. VisualStateManager.GoToState(Me, "Selected", True)
B. <VisualTransition To="Selected">
<Storyboard>
...
</Storyboard>
</VisualTransition>
C. <VisualTransition From="Selected">
<Storyboard>
...
</Storyboard>
</VisualTransition>
D. Public Shared ReadOnly SelectedProperty As DependencyProperty =
DependencyProperty.Register("Selected", GetType(VisualState), GetType(MyControl), Nothing)
Public Property Selected As VisualState
Get
Return GetValue(SelectedProperty)
End Get
Set(ByVal value As VisualState)
SetValue(SelectedProperty, value)
End Set
End Property
Answer: A

Microsoft practice test   070-506-VB   070-506-VB dumps

NO.3 End Sub
You attempt to run the application. You receive the following error message:
"Invalid cross-thread access."
You need to ensure that worker executes successfully.
What should you do?
A. Replace line 09 with the following code segment.
Dim b = CType(checkBox.GetValue(CheckBox.IsCheckedProperty), System.Nullable(Of Boolean))
Dim isChecked As Boolean = b.HasValue AndAlso b.Value
B. Replace line 09 with the following code segment.
Dim isChecked As Boolean = False
Dispatcher.BeginInvoke(Function()
isChecked = checkBox.IsChecked.HasValue AndAlso checkBox.IsChecked.Value
End Function)
C. Replace line 15 with the following code segment.
statusTextBlock.SetValue(TextBlock.TextProperty, (e.ProgressPercentage + "%"))
D. Replace line 15 with the following code segment.
Dispatcher.BeginInvoke(Function()
statusTextBlock.Text = e.ProgressPercentage + "%"
End Function)
Answer: B

Microsoft certification training   070-506-VB exam simulations   070-506-VB
13. You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You add the following code segment. (Line numbers are included for reference only.)
01 Public Class MyControl Inherits Control
02
03 Public Property Title() As String
04 Get
05 Return DirectCast(GetValue(TitleProperty), String)
06 End Get
07 Set
08 SetValue(TitleProperty, value)
09 End Set
10 End Property
11 End Class
You need to create a dependency property named TitleProperty that allows developers to set the Title.
You also need to ensure that the default value of the TitleProperty dependency property is set to Untitled.
Which code segment you add at line 02?
A. Public Shared ReadOnly TitleProperty As DependencyProperty =
DependencyProperty.Register("Untitled", GetType(System.String),
GetType(MyControl), Nothing)
B. Public Shared ReadOnly TitleProperty As DependencyProperty =
DependencyProperty.Register("Untitled", GetType(System.String),
GetType(MyControl), New PropertyMetadata("Title"))
C. Public Shared ReadOnly TitleProperty As DependencyProperty =
DependencyProperty.Register("Title", GetType(System.String),
GetType(MyControl), New PropertyMetadata("Untitled"))
D. Public Shared ReadOnly TitleProperty As DependencyProperty =
DependencyProperty.Register("Title", GetType(String),
GetType(MyControl), New PropertyMetadata(New PropertyChangedCallback(Sub(depObj, args)
depObj.SetValue(MyControl.TitleProperty, "Untitled")
End Sub)))
Answer: C

Microsoft test answers   070-506-VB dumps   070-506-VB   070-506-VB
14. You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You create a control named MyControl in the application. Each instance of the control contains a list of
FrameworkElement objects.
You add the following code segment. (Line numbers are included for reference only.)
01 Public Class MyControl
02 Inherits Control
03
04 Public ReadOnly Property ChildElements As List(Of FrameworkElement)
05 Get
06 Return DirectCast(GetValue(MyControl.ChildElementsProperty), List(Of FrameworkElement))
07 End Get
08 End Property
09 Public Sub New()
10
11 End Sub
12
13 Shared Sub New()
14
15 End Sub
16 End Class
You need to create the ChildElementsProperty dependency property. You also need to initialize the
property by using an empty list of FrameworkElement objects.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. Add the following code segment at line 03.
Public Shared ReadOnly ChildElementsProperty As DependencyProperty =
DependencyProperty.Register("ChildElements", GetType(List(Of
FrameworkElement)), GetType(MyControl), New PropertyMetadata(New
List(Of FrameworkElement)()))
B. Add the following code segment at line 03.
Public Shared ReadOnly ChildElementsProperty As DependencyProperty =
DependencyProperty.Register("ChildElements", GetType(List(Of
FrameworkElement)), GetType(MyControl), New
PropertyMetadata(Nothing))
C. Add the following code segment at line 10.
SetValue(MyControl.ChildElementsProperty, New List(Of
FrameworkElement)())
D. Add the following code segment at line 14.
ChildElementsProperty = DependencyProperty.Register("ChildElements",
GetType(List(Of FrameworkElement)), GetType(MyControl), New
PropertyMetadata(New List(Of FrameworkElement)()))
Answer: BC

Microsoft   070-506-VB   070-506-VB
15. You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You add the following code segment. (Line numbers are included for reference only.)
01 Dim outerCanvas = New Canvas()
02 Dim innerCanvas = New Canvas()
03 innerCanvas.Width = 200
04 innerCanvas.Height = 200
05 outerCanvas.Children.Add(innerCanvas)
06
You need to set the distance between the left of the innerCanvas element and the left of the outerCanvas
element to 150 pixels.
Which code segment should you add at line 06?
A. outerCanvas.Margin = New Thickness(0.0, 150.0, 0.0, 0.0)
B. innerCanvas.Margin = new Thickness(0.0, 150.0, 0.0, 0.0)
C. outerCanvas.SetValue(Canvas.LeftProperty, 150.0)
D. innerCanvas.SetValue(Canvas.LeftProperty, 150.0)
Answer: D

Microsoft exam simulations   070-506-VB exam dumps   070-506-VB exam   070-506-VB

NO.4 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4. The
application has a TextBox control named txtName.
You need to handle the event when txtName has the focus and the user presses the F2 key.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. AddHandler txtName.KeyDown, New KeyEventHandler ( AddressOf txtName_KeyDown)
B. AddHandler txtName.LostFocus, New RoutedEventHandler(AddressOf txtName_LostFocus)
C. AddHandler txtName.TextChanged, New TextChangedEventHandler(AddressOf
txtName_TextChanged)
D. Private Sub txtName_TextChanged(sender As Object, e As TextChangedEventArgs)
'Custom logic
If DirectCast(e.OriginalSource, Key) = Key.F2 Then
End If
End Sub
E. Private Sub txtName_KeyDown(sender As Object, e As KeyEventArgs)
'Custom logic
If e.Key = Key.F2 Then
End If
End Sub
F. Private Sub txtName_LostFocus(sender As Object, e As RoutedEventArgs)
'Custom logic
If DirectCast(e.OriginalSource, Key) = Key.F2 Then
End If
End Sub
Answer: AE

Microsoft   070-506-VB   070-506-VB

NO.5 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You create a new user control in the application. You add the following XAML fragment to the control.
<StackPanel KeyDown="App_KeyDown" Orientation="Vertical">
<TextBox x:Name="firstName" />
<TextBox x:Name="lastName" />
<TextBox x:Name="address" />
</StackPanel>
You add the following code segment in the code-behind file of the control. (Line numbers are included for
reference only.)
01 Private Sub App_KeyDown(ByVal sender As Object, ByVal e As KeyEventArgs)
02
03 End Sub
04
05 Private Sub FirstAndLastNameKeyDown()
06 '...
07 End Sub
You need to ensure that the FirstAndLastNameKeyDown method is invoked when a key is pressed while
the focus is on the firstName or lastName TextBox controls. You also need to ensure that the default
behavior of the controls remains unchanged.
Which code segment should you add at line 02?
A. If ((CType(sender,FrameworkElement).Name = "firstName") _
OrElse (CType(sender,FrameworkElement).Name = "lastName")) Then
FirstAndLastNameKeyDown
End If
e.Handled = false
B. If ((CType(sender,FrameworkElement).Name = "firstName") _
OrElse (CType(sender,FrameworkElement).Name = "lastName")) Then
FirstAndLastNameKeyDown
End If
e.Handled = true
C. If ((CType(e.OriginalSource,FrameworkElement).Name = "firstName") _
OrElse (CType(e.OriginalSource,FrameworkElement).Name = "lastName")) Then
FirstAndLastNameKeyDown
End If
e.Handled = false
D. If ((CType(e.OriginalSource,FrameworkElement).Name = "firstName") _
OrElse (CType(e.OriginalSource,FrameworkElement).Name = "lastName")) Then
FirstAndLastNameKeyDown
End If
e.Handled = true
Answer: C

Microsoft test questions   070-506-VB   070-506-VB exam dumps   070-506-VB exam dumps

NO.6 Private Sub worker_ProgressChanged(sender As Object, e As ProgressChangedEventArgs)

NO.7 You are developing a Silverlight 4 application.
The application contains an XAML page that defines the following Grid control.
<Grid Name="gridBody" >
<Grid.RowDefinitions>
<RowDefinition />
<RowDefinition />
</Grid.RowDefinitions>
<TextBlock Text="Employee Info" />
<TextBlock Text="Please enter employee info" Grid.Row="1" Height="20" VerticalAlignment="Top" />
<TextBox x:Name="EmpInfo" Grid.Row="1" Margin="0,25,0,0" TextWrapping="Wrap" />
...
</Grid>
The code-behind file for myPage.xaml contains the following code segment. (Line numbers are included
for reference only.)
01 Public Sub New()
02 InitializeComponent()
03
04 Dim control As UserControl = New MyCustomControl()
05
06 End Sub
You need to replace the contents of the second row of gridBody with a user control of the
MyCustomControl type.
Which code segment should you insert at line 05?
A. gridBody.Children.Insert(1, control)
B. gridBody.RowDefinitions.Remove(gridBody.RowDefinitions(1))
gridBody.Children.Insert(1, control)
C. gridBody.RowDefinitions.Remove(gridBody.RowDefinitions(1))
gridBody.Children.Insert(1, control)
gridBody.Children.Clear()
Grid.SetRow(control, 1)
gridBody.Children.Add(control)
D. gridBody.RowDefinitions.Remove(gridBody.RowDefinitions(1))
gridBody.Children.Insert(1, control)
gridBody.Children.Clear()
Grid.SetRow(control, 1)
gridBody.Children.Add(control)
Answer: D

Microsoft   070-506-VB questions   070-506-VB original questions   070-506-VB

NO.8 You are developing a Silverlight 4 application.
You have a collection named ColPeople of the List<Person> type.
You define the Person class according to the following code segment.
Public Class Person
Public Property Name() As String
Public Property Description() As String
Public Property Gender() As String
Public Property Age() As Integer
Public Property Weight() as Integer
End Class
You need to bind ColPeople to a ComboBox so that only the Name property is displayed.
Which XAML fragment should you use?
A. <ComboBox DataContext="{Binding ColPeople}" ItemsSource="{Binding ColPeople}"
DisplayMemberPath="Name" />
B. <ComboBox DataContext="{Binding Person}" ItemsSource="{Binding Person}"
DisplayMemberPath="ColPeople" />
C. <ComboBox DataContext="{Binding ColPeople}" DisplayMemberPath="Name" />
D. <ComboBox DataContext="{Binding Person}" />
Answer: A

Microsoft   070-506-VB certification   070-506-VB questions   070-506-VB certification training

NO.9 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You add a BackgroundWorker object named worker to the application.
You add the following code segment. (Line numbers are included for reference only.)
01 Public Sub New()
02 InitializeComponent()
03 worker.WorkerSupportsCancellation = True
04 AddHandler worker.DoWork, New DoWorkEventHandler(AddressOf worker_DoWork)
05 AddHandler worker.RunWorkerCompleted, New RunWorkerCompletedEventHandler(AddressOf
worker_Completed)
06 End Sub
07 Private Sub worker_DoWork(sender As Object, e As DoWorkEventArgs)
08 For i As Integer = 0 To 99
09 InvokeLongRunningProcessStep()
10 Next
11 End Sub
You need to ensure that worker can be properly canceled.
Which code segment should you use to replace line 09?
A. Dim cancel = TryCast(sender, BackgroundWorker).CancellationPending
If cancel Then
TryCast(sender, BackgroundWorker).CancelAsync()
Else
InvokeLongRunningProcessStep()
End If
B. Dim cancel = TryCast(sender, BackgroundWorker).CancellationPending
If cancel Then
e.Cancel = True
Else
InvokeLongRunningProcessStep()
End If
C. Dim cancel = e.Cancel
If cancel Then
TryCast(sender, BackgroundWorker).CancelAsync()
Else
InvokeLongRunningProcessStep()
End If
D. Dim cancel = e.Cancel
If cancel Then
e.Cancel = True
Else
InvokeLongRunningProcessStep()
End If
Answer: B

Microsoft exam prep   070-506-VB   070-506-VB exam simulations   070-506-VB questions

NO.10 statusTextBlock.Text = Convert.ToString(e.ProgressPercentage) & "%"

NO.11 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You add a BackgroundWorker object named worker to the application. You also add a CheckBox control
named checkBox and a TextBlock control named statusTextBlock.
You add the following code segment. (Line numbers are included for reference only.)
01 Public Sub New()
02 InitializeComponent()
03 worker.WorkerReportsProgress = True
04 AddHandler worker.DoWork, New DoWorkEventHandler(AddressOf worker_DoWork)
05 AddHandler worker.ProgressChanged, New ProgressChangedEventHandler(AddressOf
worker_ProgressChanged)
06 End Sub
07 Private Sub worker_DoWork(sender As Object, e As DoWorkEventArgs)
08 For i As Integer = 0 To 99
09 Dim isChecked As Boolean = checkBox.IsChecked.HasValue AndAlso
checkBox.IsChecked.Value
10 ExecuteLongRunningProcessStep(isChecked)
11 worker.ReportProgress(i)
12 Next

NO.12 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
You create a Windows Communication Foundation (WCF) Data Service. You add a service reference to
the WCF Data Service named NorthwindEntities in the Silverlight application. You also add a
CollectionViewSource object named ordersViewSource in the Silverlight application.
You add the following code segment. (Line numbers are included for reference only.)
01 Sub getOrders_Click(ByVal sender As Object, ByVal e As RoutedEventArgs)
02 Dim context As New NorthwindEntities()
03
04 Dim query = From order In context.Orders Select order
05
06 End Sub
You need to retrieve the Orders data from the WCF Data Service and bind the data to the
ordersViewSource object.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose
two.)
A. Add the following code segment at line 03.
Dim obsCollection = New ObservableCollection(Of Order)
B. Add the following code segment at line 03.
Dim dsOrders As New DataServiceCollection(Of Order)
AddHandler dsOrders.LoadCompleted, New EventHandler(Of LoadCompletedEventArgs)(Sub(dsc, args)
ordersViewSource.Source = dsOrders
End Sub)
C. Add the following code segment at line 05.
dsOrders.LoadAsync(query)
D. Add the following code segment at line 05.
dsOrders.Load(query)
E. Add the following code segment at line 05.
query.ToList().ForEach(Sub(o) obsCollection.Add(o))
ordersViewSource.Source = obsCollection
Answer: BC

Microsoft   070-506-VB exam dumps   070-506-VB original questions   070-506-VB

NO.13 End Sub

NO.14 You are developing an application by using Silverlight 4 and Microsoft .NET Framework 4.
The application contains the following XAML fragment.
<TextBlock x:Name="QuoteOfTheDay" />
The application calls a Windows Communication Foundation (WCF) service named MyService that
returns the quote of the day and assigns it to the QuoteOfTheDay TextBlock.
The application contains the following code segment. (Line numbers are included for reference only.)
01 Dim client = New MyService.MyServiceClient()
02 AddHandler client.GetQuoteOfTheDayCompleted, Sub(s, args) QuoteOfTheDay.Text = args.Result
03 client.GetQuoteOfTheDayAsync()
You need to handle errors that might occur as a result of the service call. You also need to provide a
default value of "Unavailable" when an error occurs.
Which code segment should you replace at lines 02 and 03?
A. QuoteOfTheDay.Text = "Unavailable"
AddHandler client.GetQuoteOfTheDayCompleted, Sub(s, args)
QuoteOfTheDay.Text = args.Result
End Sub
client.GetQuoteOfTheDayAsync()
B. AddHandler client.GetQuoteOfTheDayCompleted,Sub(s, args)
If args.Result IsNot Nothing Then
QuoteOfTheDay.Text = args.Result
Else
QuoteOfTheDay.Text = "Unavailable"
End If
End Sub
client.GetQuoteOfTheDayAsync()
C. AddHandler client.GetQuoteOfTheDayCompleted, Sub(s, args)
QuoteOfTheDay.Text = args.Result
End Sub
Try
client.GetQuoteOfTheDayAsync()
Catch ex As Exception
' TODO: handle exception
QuoteOfTheDay.Text = "Unavailable"
End Try
D. AddHandler client.GetQuoteOfTheDayCompleted, Sub(s, args)
If args.[Error] Is Nothing Then
QuoteOfTheDay.Text = args.Result
Else
' TODO: handle error
QuoteOfTheDay.Text = "Unavailable"
End If
End Sub
client.GetQuoteOfTheDayAsync()
Answer: D

Microsoft   070-506-VB   070-506-VB

NO.15 You are developing a Silverlight 4 application.
You define an Invoice object according to the following code segment.
Public Class Invoice
Public Property InvoiceId() As Integer
Public Property Amount() As Double
Public Property Supplier() As Supplier
Public Property InvoiceDate() As DateTime
Public Property PayDate() As DateTime
Public Property InvoiceDescription() As String
End Class
You need to display a list of invoices that have the following properties displayed on each line: InvoiceId,
Amount, and InvoiceDate.
Which XAML fragment should you use?
A. <ListBox x:Name="InvoiceListBox">
<StackPanel Orientation="Horizontal">
<TextBlock Text="{Binding Path=InvoiceId}" />
<TextBlock Text="{Binding Path=Amount}" />
<TextBlock Text="{Binding Path=InvoiceDate}" />
</StackPanel>
</ListBox>
B. <ListBox x:Name="InvoiceListBox">
<StackPanel Orientation="Horizontal">
<ListBoxItem>
<TextBlock Text="{Binding Path=InvoiceId}" />
</ListBoxItem>
<ListBoxItem>
<TextBlock Text="{Binding Path=Amount}" />
</ListBoxItem>
<ListBoxItem>
<TextBlock Text="{Binding Path=InvoiceDate}" />
</ListBoxItem>
</StackPanel>
</ListBox>
C. <ListBox x:Name="InvoiceListBox">
<ListBox.Items>
<ItemsPanelTemplate>
<StackPanel Orientation="Horizontal">
<TextBlock Text="{Binding Path=InvoiceId}" />
<TextBlock Text="{Binding Path=Amount}" />
<TextBlock Text="{Binding Path=InvoiceDate}" />
</StackPanel>
</ItemsPanelTemplate>
</ListBox.Items>
</ListBox>
D. <ListBox x:Name="InvoiceListBox">
<ListBox.ItemTemplate>
<DataTemplate>
<StackPanel Orientation="Horizontal">
<TextBlock Text="{Binding Path=InvoiceId}" />
<TextBlock Text="{Binding Path=Amount}" />
<TextBlock Text="{Binding Path=InvoiceDate}" />
</StackPanel>
</DataTemplate>
</ListBox.ItemTemplate>
</ListBox>
Answer: D

Microsoft   070-506-VB braindump   070-506-VB   070-506-VB exam

NO.16 You are developing a Silverlight 4 application.
The application defines the following XAML fragment. (Line numbers are included for reference only.)
01 <ComboBox>
02 <ComboBoxItem Content="Item 1" />
03 <ComboBoxItem Content="Item 2" />
04 <ComboBoxItem Content="Item 3" />
05 </ComboBox>
The code-behind file contains the following code segment. (Line numbers are included for reference only.)
06 Private Sub PrintText(sender As Object, args As SelectionChangedEventArgs)
07
08 MessageBox.Show("You selected " + cbi.Content.ToString() + ".")
09 End Sub
You need to ensure that when the user selects an item in a ComboBox control, the content of the item is
displayed.
What should you do?
A. Replace the following XAML fragment at line 01.
<ComboBox SelectionChanged="PrintText">
Add the following code segment at line 07.
Dim cbi As ComboBoxItem = TryCast(TryCast(sender, ComboBox).SelectedItem, ComboBoxItem)
B. Replace the following XAML fragment at line 01.
<ComboBox SelectionChanged="PrintText">
Add the following code segment at line 07.
Dim cbi As ComboBoxItem = TryCast(TryCast(sender, ComboBox).SelectedIndex, ComboBoxItem)
C. Replace the following XAML fragment at line 01.
<ComboBox DropDownClosed="PrintText">
Add the following code segment at line 07.
Dim cbi As ComboBoxItem = TryCast(TryCast(sender, ComboBox).SelectedItem, ComboBoxItem)
D. Replace the following XAML fragment at line 01.
<ComboBox DropDownClosed="PrintText">
Add the following code segment at line 07.
Dim cbi As ComboBoxItem = TryCast(TryCast(sender, ComboBox).SelectedIndex, ComboBoxItem)
Answer: A

Microsoft   070-506-VB   070-506-VB braindump   070-506-VB certification training   070-506-VB

ITCertKing offer the latest 000-224 exam material and high-quality HP2-N40 pdf questions & answers. Our 70-461 VCE testing engine and 000-540 study guide can help you pass the real exam. High-quality E20-553 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/070-506-VB_exam.html