From the view of specialized examination point, it is necessary to teach you tips about the exam. You need to outsmart, and do not give your future the chance of failure. ITCertKing is a great resource site. It includes Microsoft MB7-514 Exam Materials, study materials and technical materials, as well as exam training and detailed explanation and answers. The website which provide exam information are surged in recent years. This may cause you clueless when you prepare the Microsoft MB7-514 exam. ITCertKing's Microsoft MB7-514 exam training materials are effective training materials that proven by professionals and the candidates who passed the exam. It can help you to pass the exam certification easily.
ITCertKing is a website that specializes in providing IT exam information. The pass rate can achieve 100%. Which is one of the reasons that most candidates willing to believe the ITCertKing. ITCertKing have been always concerned about the needs of the majority of candidates. We always with the greatest ability to meet the needs of the candidates . ITCertKing's Microsoft MB7-514 exam training materials is an unprecedented IT certification training materials. With it, your future career will be rain or shine.
Exam Code: MB7-514
Exam Name: Microsoft (NAV 5.0 C/SIDE Introduction)
One year free update, No help, Full refund!
Total Q&A: 104 Questions and Answers
Last Update: 2013-11-22
ITCertKing's Microsoft MB7-514 exam training materials is no other sites in the world can match. Of course, this is not only the problem of quality, it goes without saying that our quality is certainly the best. More important is that ITCertKing's exam training materials is applicable to all the IT exam. So the website of ITCertKing can get the attention of a lot of candidates. They believe and rely on us. It is also embodied the strength of our ITCertKing site. The strength of ITCertKing is embodied in it. Our exam training materials could make you not help recommend to your friends after you buy it. Because it's really a great help to you.
In the era of rapid development in the IT industry, we have to look at those IT people with new eyes. They use their high-end technology to create many convenient place for us. And save a lot of manpower and material resources for the state and enterprises. And even reached unimaginable effect. Of course, their income must be very high. Do you want to be the kind of person? Do you envy them? Or you are also IT person, but you do not get this kind of success. Do not worry, ITCertKing's Microsoft MB7-514 exam material can help you to get what you want. To select ITCertKing is equivalent to choose a success.
MB7-514 Free Demo Download: http://www.itcertking.com/MB7-514_exam.html
NO.1 In a standard Microsoft Dynamics NAV Functional Area, describe the table relationship(s)
between a Master table and the corresponding Ledger table.
A.A field in the Master Table is table-related to the Ledger Table.
B.A field in the Ledger Table is table-related to the Master Table.
C.The Master Table and the Ledger Table each have a field that is table-related to the other.
D.The Ledger Table and the Master Table do not have any fields that are table-related to the other at all.
Correct:B
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
NO.2 In the Microsoft Dynamics NAV application, which of these table types will have the most
trigger code (within a single Functional Area)? In other words, which type of table usually has the
most business rules?
A.Master table
B.Supplemental table
C.Journal table
D.Ledger table
Correct:C
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
NO.3 You have a table in which the user makes journal entries. According to Microsoft Dynamics
NAV standards, what type of form is used with this table?
A.List Form
B.Card Form
C.Worksheet Form
D.Tabular Form
Correct:C
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
NO.4 What is the maximum number of fields that can be contained in a secondary key?
A.1
B.2
C.20
D.40
Correct:C
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
NO.5 A table description contains the following:
A.Properties, Triggers, Fields, and Keys.
B.Names, Fields, Keys, and Forms.
C.Properties, Data, Fields, and Keys.
D.Data and Keys.
Correct:A
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
NO.6 When you create a table relation, which characteristic must be true of the table specified by the
table ID?
A.The field ID specified must be part of the primary key.
B.The table must be a master table.
C.The table must not contain any records.
D.The primary key must be a code data type.
Correct:A
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
NO.7 What is the Master Table for the Cash Management Functional Area in Microsoft Dynamics NAV?
A.Customer
B.G/L Account
C.Cash Account
D.Bank Account
Correct:D
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
NO.8 Which Data Type is best for storing whole numbers in a table, especially when there are
database size limitations?
A.BLOB
B.Integer
C.Decimal
D.Code
Correct:B
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
NO.9 Which of the following best describes Tab Controls?
A.Tab controls can only contain one tab, named General.
B.Tab controls must contain a tab named General. Any additional names are specified using the
NewTabName property.
C.Tab controls can contain multiple tabs; the names of which are specified using the MultipleTab property.
D.Tab controls can contain multiple tabs; the names of which are specified using the PageNames property.
Correct:D
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
NO.10 Which are the valid "parts" of a table in Microsoft Dynamics NAV?
A.Data and Legs
B.Data and Properties
C.Data and Description
D.Source and Description
Correct:C
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
NO.11 What field property will cause a lookup form to be displayed when the F6 key is pressed?
A.OptionString
B.Lookup
C.TableRelation
D.ValuesAllowed
Correct:C
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
NO.12 Which property is used to define a table relationship?
A.TableConstraint
B.RelateField
C.DataItemLink
D.TableRelation
Correct:D
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
NO.13 When is it possible to change the name of a field in a table?
A.You must first delete the data from the field in all records in the table before changing the field name.
B.You must first remove all references to the field in other tables, forms, and reports.
C.You can always change the name of a field in a table.
D.You can never change the name of a field in a table.
Correct:C
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
NO.14 Which of the following Functional Areas has more than one Master Table?
A.General Ledger
B.Fixed Assets
C.Inventory
D.Sales & Receivables
Correct:B
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
NO.15 Key Groups are used to:
A.Allow keys to have a group of fields containing more than one field.
B.Define the group of reports that use a key in a table.
C.Activate and deactivate a seldom used group of keys.
D.Associate a group of keys with a report.
Correct:C
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
NO.16 Which of the following characteristics are not a result of table relationships?
A.Validate data entries.
B.Optimize table records.
C.Perform Lookup in other tables.
D.Automatically propagate changes from one table to other tables.
Correct:B
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
NO.17 What happens if you set the Editable property of a field in a table to "No"?
A.The field will not be modifiable, whether you use a form or C/AL code.
B.You will not be able to modify the field using C/AL code, but you can still modify it using a form.
C.You will not be able to modify the field using a form, but you can still modify it using C/AL code.
D.The field will not be able to be used on forms.
Correct:C
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
NO.18 Using standard navigation in Microsoft Dynamics NAV, pick the three options to access the
ledger form from a card form.
A.Pressing Ctrl+F5, selecting the Ledger Entries menu item, or selecting the Drilldown button on a
flowfield.
B.Pressing Ctrl+F5, selecting the Ledger Entries menu item, or selecting the Lookup button on the tool
bar.
C.Pressing the F5 key, selecting the Ledger Entries menu item, or selecting the Drilldown button on a
flowfield.
D.Pressing the F5 key, selecting the Ledger Entries menu item, or selecting the Lookup button on the tool
bar.
Correct:A
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
NO.19 A SumIndexField is a field that can be attached to a key definition. Which of the following are
accurate characteristics of a SumIndexField?
A.A SumIndexField can be any data type and can be attached to any key in the table.
B.A SumIndexField must be a decimal field and can be attached to any key in the table.
C.A SumIndexField must be a decimal field and can only be attached to the primary key.
D.A SumIndexField can be any data type and can only be attached to the primary key.
Correct:B
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
NO.20 Into which table are the Journal Entries made for the Sales & Receivables Functional Area?
A.Cust. Journal Line
B.Cash Rec. Journal Line
C.Gen. Journal Line
D.Receivables Journal Line
Correct:C
Microsoft dumps MB7-514 MB7-514 MB7-514 dumps MB7-514 exam
ITCertKing offer the latest NS0-145 exam material and high-quality LOT-958 pdf questions & answers. Our MB5-705 VCE testing engine and 200-120 study guide can help you pass the real exam. High-quality BCP-340 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.itcertking.com/MB7-514_exam.html
没有评论:
发表评论